Commercial Exterior Painting In Richmond Hill With SurGuard® Masonry Coating

SurGuard® Commercial Masonry Coating

A&A Masonry provides commercial exterior painting in Richmond Hill using the SurGuard® masonry coating system for vertical brick, block and concrete walls. We assess the existing finish, visible masonry damage and access needs before defining the proposed repair, preparation and coating work.

For a commercial assessment, send the Richmond Hill property address, wall photos and any restrictions around occupants, entrances or deliveries.

Vertical surfaces only. This coating service is limited to vertical exterior brick, block and concrete. Horizontal surfaces such as walkways, patios, step treads and wall caps are not included.

Paint roller applying white coating across a red brick wall

SurGuard® masonry coating for exterior brick and concrete only

Workers service a commercial facade combining red brick and gray concrete block walls

No interior office painting, no wood or metal surfaces

Blue-coated brick wall shown beside shrubs in rainy, snowy, and sunny conditions

Planned for real Richmond Hill traffic, sun and winter exposure

Why Commercial Exterior Painting In Richmond Hill Needs A Masonry System

Many Richmond Hill properties sit along high traffic routes such as Yonge Street, Highway 7 and Bayview Avenue. Standard exterior paint on brick and concrete often peels early in these conditions, traps moisture and makes later repairs harder. The building can look fresh for a short time, then starts to bubble and flake, and water finds its way into the wall. That is why A&A Masonry uses SurGuard®, a masonry coating system designed specifically for exterior brick and concrete on commercial buildings.

With SurGuard®, the masonry is the priority. We assess how water hits and leaves the building, clean the walls, repair cracks, replace damaged bricks where needed and address obvious water paths. Only after the masonry is ready do we apply the SurGuard® masonry coating in the proper layers. The coating is made for mineral surfaces, helps resist moisture and salt and still allows vapour to move through the wall. The goal is not just a colour change but a more complete system for the masonry envelope.

We do not paint interior offices, wood siding or metal cladding. Our work is on exterior masonry only, so your brick and concrete walls receive a SurGuard® system that is built for them, not a product meant for another type of surface.

Surfaces We Coat On Richmond Hill Commercial Buildings

- Exterior brick elevations on low-rise commercial buildings
- Brick veneer on retail plazas and mixed-use buildings
- Concrete block walls on industrial and service units
- Exposed concrete foundation walls above grade
- Previously painted masonry that needs a better system

We do not paint wood siding, metal panels, interior offices or interior walls. SurGuard® is for exterior masonry only.

Vertical surfaces only. This coating service is limited to vertical exterior brick, block and concrete. Horizontal surfaces such as walkways, patios, step treads and wall caps are not included.

SurGuard® Commercial Exterior Masonry Coating Services In Richmond Hill

Every commercial property in Richmond Hill is different. We adjust the SurGuard® system to the building type, height and exposure so the coating works with the masonry, not against it.

Full Elevation Colour Changes

We clean, repair and coat full brick and concrete elevations with SurGuard® so older colours, patchwork repairs and tenant changes are tied into one clean, updated look.

Worker applies gray coating to brick facade of a multi-unit residential building

Street Facing And Corner Elevations

Many Richmond Hill projects focus SurGuard® on the main street facades, corner exposures and customer facing walls where appearance and branding matter most.

Concrete Block And Service Yard Walls

Exposed block walls at the sides and rear of buildings often take heavy weather and salt. SurGuard® can be used to give these areas a more finished look and a better protective layer.

Concrete block foundation walls beneath red brick exterior walls at a building corner

Exposed Foundation And Plinth Coating

Bare concrete bands along the base of walls stain easily and can look unfinished. We prep and coat exposed foundation sections with SurGuard® to tie them into the rest of the facade.

Split view comparing multicoloured exposed brick with a uniform light blue painted brick finish

Previously Painted Masonry Corrections

Where brick or concrete has already been painted with standard products, we deal with peeling areas, repair the masonry and move the wall into the SurGuard® coating system as far as practical.

Masonry Prep Before SurGuard®

SurGuard® works best on solid masonry. We include cleaning, local brick replacement, crack repairs and tuckpointing where needed so the system is built on a sound base.

When SurGuard® Commercial Coating Makes Sense For Your Richmond Hill Building

SurGuard® is a good fit for many low-rise commercial buildings in Richmond Hill. These points can help you decide if it is worth a closer look.

Three-panel masonry wall sequence showing coating removal, mortar repair, and light blue coating application

Patchy Colours And Old Tenant Branding

If your brick or block walls show old tenant colours, faded logos or past repairs in different tones, a SurGuard® colour change can bring everything back to one clear appearance.

Peeling Paint On Brick Or Block

Flaking paint on masonry usually means the coating and the wall were not a good match. SurGuard® is designed for brick and concrete and is installed as a system, not a quick cover up.

Textured gray masonry coating beside corrugated metal siding during snowfall

Busy Corridors And Harsh Exposure

Buildings near Highway 7, Yonge Street or Highway 404 see strong sun, wind and road spray. SurGuard® adds a masonry friendly layer that helps the wall handle these conditions better.

Brick wall showing contrasting red and white finishes

Brick Repairs Planned Or Underway

If you are already planning brick or block repairs, this can be an ideal time to move into a SurGuard® coating so the masonry repair and new finish are planned together.

How Our SurGuard® Commercial Painting Process Works In Richmond Hill

Commercial projects require precise planning for tenants, access, safety, and weather. Our process keeps the focus on masonry and on running your site with minimal disruption.

Site Visit And Masonry Assessment. We walk your Richmond Hill property, inspect the brick and concrete up close, check for cracks and efflorescence, review previous coatings, and assess how water impacts the walls.
Scope, Colours And Phasing. We confirm which elevations and masonry elements will receive SurGuard®, discuss colour direction, and review access and staging based on your site’s operations.
Cleaning And Masonry Repairs. We clean the masonry, remove loose material, and perform local brick replacement, crack repairs, and tuckpointing where needed to ensure SurGuard® has a solid base.
Masking And Protection. We protect windows, signage, doors and surfaces that are not being coated, including wood, metal and any interior areas that are not part of the work.
SurGuard® Application. We apply the SurGuard® masonry coating in the required layers, following the manufacturer’s guidelines for coverage and curing to ensure the system performs as intended.
Final Walkthrough And Care Notes. After the clean up, we review the work with you, provide photos where helpful and outline simple care points and expectations for the coating life.

Richmond Hill Commercial Areas We Serve

We use SurGuard® on commercial masonry buildings across Richmond Hill and nearby GTA communities, including:

Retail and commercial corridors along Yonge Street

Plazas and mixed use buildings near Highway 7 and Highway 404

Business parks and industrial units near Leslie and East Beaver Creek

Commercial and service buildings along Bayview and Major Mackenzie

Properties in neighbouring Markham, Vaughan and surrounding areas

If your site sits just outside Richmond Hill, we can often still help as part of our wider GTA and Southern Ontario service area.

Related Richmond Hill Masonry And Exterior Services

SurGuard® commercial coating often works best with other masonry repairs. If your Richmond Hill building also needs brick repair, tuckpointing, or waterproofing, we can plan the work as a single package.

Not Sure If SurGuard® Is Right For Your Building

Some buildings are better suited to a complete coating system, while others only need targeted work. We can walk your Richmond Hill property, explain what we see, and outline SurGuard® options so you can make an informed decision.

Richmond Hill Commercial Exterior Painting FAQs

What makes SurGuard® different from regular exterior paint

SurGuard® is a masonry coating system that is made for brick and concrete. It is applied as a system over prepared masonry, helps resist water and salt and lets vapour move through the wall. We do not use standard house paint on commercial masonry exteriors.

Can you work while my tenants stay open

In many cases, yes. We plan SurGuard® projects around access, business hours and safety. During the site visit we discuss how your tenants operate and plan phasing and set up accordingly.

Can you coat only part of the building

Yes. We often focus on street facing elevations, main entrances and high visibility areas. During the quote we will show you where SurGuard® will have the most visual and practical impact.

Do you paint wood, metal or interior offices

No. Our SurGuard® work in Richmond Hill is on exterior masonry only, such as brick, block and concrete. We do not paint wood siding, metal panels, interior offices or interior walls.

How long does a SurGuard® coating last

Coating life depends on exposure, colour choice and masonry condition. The goal with SurGuard® is a longer term finish that stands up better to Richmond Hill weather than standard paint when installed over solid masonry.

Planning Commercial Exterior Painting In Richmond Hill

If you want a cleaner, more consistent look for your brick and concrete elevations, A&A Masonry can help you do it with the SurGuard® masonry system. We focus on the masonry first, then the colour, so your commercial building looks good and the walls are treated as a system.